Wheel Loader
Heavy loader for silage, bulk crops, manure, logs and large buckets.
What it is used for
Heavy loader for silage, bulk crops, manure, logs and large buckets.
How to operate it
Fit a suitable bucket/fork/grapple, approach squarely and use smooth articulation while carrying the load low.
Selection and setup
Check the in-game shop for power requirement, working width, capacity, supported fill types, hitch/header compatibility and optional configurations before purchase or leasing.
Operating procedure
Before starting, confirm the machine is compatible with the crop/material and that the power unit meets the shop requirement. Attach or enter the machine, unfold/prepare it, position at the start of the work area, lower/activate the working components where applicable, then work consistent passes at the machine’s rated working speed. Monitor fill level, material type and missed strips. Stop/lift the working parts before tight headland turns, reposition, then resume.
Before you buy or lease
Check working width, working speed, power requirement, capacity, supported fill/crop types, hitch/header compatibility, wheel/tyre options and whether the tool combines another field operation. Lease highly specialised equipment when it will only be used for a small acreage.
Compatibility & attachments
This shows what the equipment connects to, which attachment families work with it, and what each combination is used for. For a specific model, the in-game shop Combinations panel is the final compatibility check.
| Compatible connection / attachment | Used for | Important notes |
|---|---|---|
| Wheel-loader bucket | Move large volumes of silage, grain, manure, stones and other loose material. | Use WL/wheel-loader interface tools. |
| Wheel-loader pallet fork | Move heavy pallets/containers where supported. | Wheel loaders are heavier than farm front loaders. |
| Wheel-loader bale/log tools | Handle bales or logs with matching WL attachments. | Use the wheel-loader version of the tool. |
Base-game equipment examples
| Machine / tool | Compatible with | Used for |
|---|---|---|
| JCB 435S | Wheel-loader tools (WL family) | Heavy bulk, bale, pallet and log handling |
| Volvo L120H | Wheel-loader tools (WL family) | Heavy bulk, bale, pallet and log handling |
| Volvo L120H Electric Conversion | Wheel-loader tools (WL family) | Heavy bulk, bale, pallet and log handling |
| Volvo L180H | Wheel-loader tools (WL family) | Heavy bulk, bale, pallet and log handling |
Procedure
- Fit the wheel loader with an attachment suited to the load: bucket for loose material, pallet fork for pallets, bale tool for bales, or log tool for timber.
- Approach the load slowly and squarely with the attachment low and level.
- Engage fully under/around the load before lifting; keep heavy loads close to the machine for stability.
- Travel with the load low enough to preserve stability and visibility, especially on slopes/turns.
- At the destination, raise only as much as necessary, place/tip the load gently, then lower the attachment before driving away.
Detailed procedure guides
Alternative options
Telehandler for height/reach.
Front loader for lighter work.
Practical tips
- Excellent for bunker-silo compaction and high-volume loading.
- Operate at the tool’s rated working speed and allow space at headlands for clean turns.