Corn Header
Harvests corn and often other row crops supported by that header.
What it is used for
Harvests corn and often other row crops supported by that header.
How to operate it
Mount on a compatible combine and work ripe corn at the rated speed.
Selection and setup
Check the in-game shop for power requirement, working width, capacity, supported fill types, hitch/header compatibility and optional configurations before purchase or leasing.
Operating procedure
Before starting, confirm the machine is compatible with the crop/material and that the power unit meets the shop requirement. Attach or enter the machine, unfold/prepare it, position at the start of the work area, lower/activate the working components where applicable, then work consistent passes at the machine’s rated working speed. Monitor fill level, material type and missed strips. Stop/lift the working parts before tight headland turns, reposition, then resume.
Before you buy or lease
Check working width, working speed, power requirement, capacity, supported fill/crop types, hitch/header compatibility, wheel/tyre options and whether the tool combines another field operation. Lease highly specialised equipment when it will only be used for a small acreage.
Compatibility & attachments
This shows what the equipment connects to, which attachment families work with it, and what each combination is used for. For a specific model, the in-game shop Combinations panel is the final compatibility check.
| Compatible connection / attachment | Used for | Important notes |
|---|---|---|
| Compatible combine harvester | Harvest corn and other crops listed by that header. | Compatibility is combine/header specific. |
| Header trailer | Transport wide corn headers. | Use if the header is too wide for safe road travel. |
Procedure
- Confirm the corn header is compatible with the combine and intended crop before attaching it.
- Attach it squarely and use a header trailer for road transport when the header is too wide to move safely/easily while mounted.
- At the field, unfold/prepare the header, lower it to working height and activate the combine.
- Keep the uncut crop inside the full working width while avoiding missed strips.
- Lift the header before tight turns and watch for terrain that could cause the header to miss crop.
Detailed procedure guides
Alternative options
Forage header + forage harvester to make chaff instead of grain.
Practical tips
- Grain and chaff are different harvest routes; decide before the harvest window.
- Operate at the tool’s rated working speed and allow space at headlands for clean turns.