Telehandler
Loader with long reach for stacking pallets/bales and loading high-sided trailers.
What it is used for
Loader with long reach for stacking pallets/bales and loading high-sided trailers.
How to operate it
Choose the correct attachment, extend the boom only as far as needed, keep loads low while moving and level the machine before high lifts.
Selection and setup
Check the in-game shop for power requirement, working width, capacity, supported fill types, hitch/header compatibility and optional configurations before purchase or leasing.
Operating procedure
Before starting, confirm the machine is compatible with the crop/material and that the power unit meets the shop requirement. Attach or enter the machine, unfold/prepare it, position at the start of the work area, lower/activate the working components where applicable, then work consistent passes at the machine’s rated working speed. Monitor fill level, material type and missed strips. Stop/lift the working parts before tight headland turns, reposition, then resume.
Before you buy or lease
Check working width, working speed, power requirement, capacity, supported fill/crop types, hitch/header compatibility, wheel/tyre options and whether the tool combines another field operation. Lease highly specialised equipment when it will only be used for a small acreage.
Compatibility & attachments
This shows what the equipment connects to, which attachment families work with it, and what each combination is used for. For a specific model, the in-game shop Combinations panel is the final compatibility check.
| Compatible connection / attachment | Used for | Important notes |
|---|---|---|
| Telehandler bucket | Load loose material at greater reach/height. | Use TL/telehandler tool variants. |
| Telehandler pallet fork | Stack pallets/high racks. | Telehandler reach is useful for height. |
| Telehandler bale tool | Move and stack bales. | Use a telehandler-compatible bale fork/handler. |
| Telehandler log/manure tools | Handle logs or manure with matching telehandler tools. | Use the TL tool family, not front-loader or wheel-loader variants. |
Base-game equipment examples
| Machine / tool | Compatible with | Used for |
|---|---|---|
| Fendt Cargo T740 | Telehandler tools (TL family) | High-reach pallet, bale and bulk handling |
| JCB 541-70 AGRI PRO | Telehandler tools (TL family) | High-reach pallet, bale and bulk handling |
| Kramer KT557 | Telehandler tools (TL family) | High-reach pallet, bale and bulk handling |
| Manitou MLT 841-145 PS+ | Telehandler tools (TL family) | High-reach pallet, bale and bulk handling |
| Merlo MF44.9CS-170-CVTRONIC | Telehandler tools (TL family) | High-reach pallet, bale and bulk handling |
| Schäffer 9660 T-2 | Telehandler tools (TL family) | High-reach pallet, bale and bulk handling |
| Sennebogen 340G | Telehandler tools (TL family) | High-reach pallet, bale and bulk handling |
Procedure
- Fit the telehandler with an attachment suited to the load: bucket for loose material, pallet fork for pallets, bale tool for bales, or log tool for timber.
- Approach the load slowly and squarely with the attachment low and level.
- Engage fully under/around the load before lifting; keep heavy loads close to the machine for stability.
- Travel with the load low enough to preserve stability and visibility, especially on slopes/turns.
- At the destination, raise only as much as necessary, place/tip the load gently, then lower the attachment before driving away.
Detailed procedure guides
Alternative options
Front loader: cheaper and simpler.
Wheel loader: stronger for bulk material.
Practical tips
- Long boom extension reduces stability; use counterweight and smooth movements.
- Operate at the tool’s rated working speed and allow space at headlands for clean turns.