Tree Harvester
Mechanised forestry machine that fells, delimbs and cuts compatible trees.
What it is used for
Mechanised forestry machine that fells, delimbs and cuts compatible trees.
How to operate it
Grip the trunk with the harvesting head, cut, feed the stem through the head to remove branches, and cut logs to planned lengths.
Selection and setup
Check the in-game shop for power requirement, working width, capacity, supported fill types, hitch/header compatibility and optional configurations before purchase or leasing.
Operating procedure
Before starting, confirm the machine is compatible with the crop/material and that the power unit meets the shop requirement. Attach or enter the machine, unfold/prepare it, position at the start of the work area, lower/activate the working components where applicable, then work consistent passes at the machine’s rated working speed. Monitor fill level, material type and missed strips. Stop/lift the working parts before tight headland turns, reposition, then resume.
Before you buy or lease
Check working width, working speed, power requirement, capacity, supported fill/crop types, hitch/header compatibility, wheel/tyre options and whether the tool combines another field operation. Lease highly specialised equipment when it will only be used for a small acreage.
Compatibility & attachments
This shows what the equipment connects to, which attachment families work with it, and what each combination is used for. For a specific model, the in-game shop Combinations panel is the final compatibility check.
| Compatible connection / attachment | Used for | Important notes |
|---|---|---|
| Harvester head (integrated/machine-specific) | Fell, delimb and cut compatible trees to length. | Maximum tree diameter varies by machine; head is generally machine-specific rather than a universal shop attachment. |
Procedure
- Choose a tree type/diameter the harvester head can process and position the machine on stable ground.
- Grip the trunk low and keep the boom aligned so the tree can be felled into a clear area.
- Cut/fell the tree, then feed the stem through the processing head to delimb it.
- Cut logs to the intended sale/transport length and stack them in an orderly pile.
- Reposition before processing the next tree rather than dragging long stems through obstacles.
Detailed procedure guides
Alternative options
Chainsaw for mixed/manual forestry.
Practical tips
- Plan log length consistently for easier transport and stacking.
- Operate at the tool’s rated working speed and allow space at headlands for clean turns.